Alphi-11 Antifreeze & Protector Combined 5lt - 61033 · Protects against corrosion and limescale · Maintains efficiency so extending system life · Prevents bacterial contamination · Compatible with all metals and materials commonly used in heating systems · Non-toxic, environmentally friendly · Combined antifreeze and protector · Protects heating, chilled water and solar systems
Product Uses Fernox Protector Alphi-11 is a combined antifreeze and inhibitor, which gives long term protection of domestic central heating systems against internal corrosion and limescale formation. It prevents corrosion of all metals found in these systems, i.e. ferrous metals, copper and copper alloys and aluminium. It is especially recommended for use in solar systems. Fernox Protector Alphi-11 is compatible with all metals and materials commonly used in central heating systems.
For continued protection we recommend Protector levels are checked regularly (annually). The concentration of the product can be easily measured on site using a Fernox Protector test kit.
Application and Dosage The minimum recommended “in-use” concentration of the product is 25% in order to ensure adequate corrosion protection. This concentration will protect down to -11°C. A concentration of 40% will protect down to -22°C. Protector Alphi-11 can be introduced via the feed and expansion tank or other suitable point of application, e.g. radiator, using a Fernox Injector. Introduce into the system after having drained a quantity of water at least equal to the amount of Alphi-11 to be added. Engage the circulating pump and have the system online for a few hours in order to achieve an even distribution.
In single feed indirect cylinders, e.g. "Primatic" or similar, potable water chemicals must be used.
We recommend untreated systems are thoroughly cleansed and flushed, in accordance with BS7593 and Benchmark, using Fernox Restorer before treating with Fernox Protector Alphi-11 as existing debris can damage the installation.
Packaging, Handling and Storage
Fernox Protector Alphi-11 is supplied in 5 and 25 litre containers.
Fernox Protector Alphi-11 is classified as non-hazardous and non-irritant, but as with all chemicals keep out of reach of children. Do not mix with other chemicals with the exception of Fernox products. No not take internally. In case of contact with eyes or skin, rinse immediately with plenty of water.
