* Two part epoxy putty * Sets as hard as steel in 10 - 20 minutes * Easy and clean to mix and use * Superb adhesion to almost any surface, even when wet * Can be sawn, filed, drilled, sanded and painted * Resilient to shock, vibration and heat * Can be applied under water
Product Uses Fernox Fix-It is used for repairing metals, glass, ceramics, plastics and wood. Fix-It will even repair holes in radiators and leaks in pipes.
Physical Properties Fernox Fix-It is a two part epoxy putty. Fernox Fix-It is resistant to temperatures of up to 150°C and to most household chemicals.
Application and Dosage Sand to roughen the surface of the object you wish to fix, and clean off any loose debris or dust. Cut off the required amount and knead until it forms an even consistency and colour. Apply to the surface to be repaired within 5 minutes of mixing and push down with firm pressure into any holes or cracks. Then shape as required. Fix-It will harden like steel within 10 - 20 minutes. It can be sanded, etc., after 1 hour.
Packaging, Handling and Storage Fernox Fix-It is supplied in 50 g tubes. Fernox Fix-It is classified as irritant. Contains Epoxy Resin. May cause sensitisation by skin contact. Irritating to eyes and skin. After contact with skin wash immediately with plenty of water. Wear suitable gloves and eye/face protection. Keep out of reach of children.
