FXL01 - DISCONTINUED The timeless appeal of a traditionally styled fire with innovative function; a combination of benefits from modern catalytic technology. The FXL01 does not require a chimney or flue. All the heat is distributed into the room, therefore none is lost up the chimney.The only considerations when installing this appliance are a minimum room size of 30m2, an accessible gas supply and adequate ventilation.
Specifications Minimum Room Size 30m3 Fire Type Fluless inset p30G Efficiency 100% Control Type Manual - Rotary / Remote control Heat Input (Max/Min) Gross 2.6kW / 1.5kW Heat Output (Max/Min) Gross 2.6kW / 1.5kW Running Costs Per Hour (Max/Min)* 6.2p / 3.6p Outline Dimensions** W485 x H590 x D145 (mm) Installation Wall Mounted Air Vent Required 100cm2 Safety Oxygen Depletion Sensor Flame Failure Device Catalytic Convertor Glass Fronted Options Coal, pebble fuelbed Remote control Choice of frets and frames *** * Price based on 2.4p/kWh. Gas prices may vary. Please check with your supplier. ** Please refer to Technical specification for more product information. Pebble Fuelbed Picture Fullsize Picture Fret & Frame Options Technical Specifications Instructions Manual PLEASE READ! This fire has been discontinued and no longer available. Firecraft are replacing this model with a newer design in January 2008. |