EL02- DISCONTINUED Decorative heat at your finger tips. Modern technology creates this enchanting electric fire with a traditional flame picture and attractive warm glow.Combining a flickering flame effect and under bed glow this realistic alternative to a gas fire can be adapted to almost any fitting situation with the help of its inclusive spacer frame. The independent fan heater can be varied between: Off, 1kW or 2kW setting so that the flame effect can be left running during those hot summer nights. Specifications Fire Type Traditional Electric Efficiency 100% Control Type Manual - Switch Heat Input (Max/Min) Gross 2.0kW / 1.0kW Heat Output (Max/Min) Gross 2.0kW / 1.0kW Running Costs Per Hour (Max/Min)* 16.2p / 8.1p Outline Dimensions** W485 x H590 x D120 (mm) Installation Inset - Fireplace Stand-alone Air Vent Required N/A Safety Thermal Trip Switch Options Choice of fret and frames*** * Price based on 8.1p/kWh. Electricity prices may vary. Please check with your supplier. ** Please refer to Technical specification for more product information. Fullsize Picture Fret & Frame Options Technical Specifications |